Around Town- the Shingle

I have long adored the scalloped shingles on this light house around the corner from me, and while I was out for a run early yesterday I decided to snap a a few photos to share.
Very rarely do I see scalloped shingles top to bottom.  
They are usually at the top level of a Victorian or as a small accent.
But seriously, the top to bottom wins- this is fabulous. 
 If I ever need to re-shingle my house this needs to happen.
Love.
How about you?




the chair


Is DONE!  
I finished it last night in upholstery class, and I am so glad I stuck with my crappy little mold chair.
It is really comfortable and has amazing lower back support 
(just sprained my back last week so I notice that stuff at the moment).


So here is was before...
 and the horror show during...
haven't picked anything up off the curb since.
 and after it was stripped and bleached to the moon...
 it underwent major gluing and traction...
 and slowly became a chair again.
I really thought this class would make for a great tutorial, but here is the deal...
This upholstery class was geared toward your specific chair.
The instructor went around to each person and told you what you needed to do at each step.
There were ottomans, benches, club chairs- and everyone was doing something different.
This also took me 8 classes that were 3 hours each. 

I am going to try to sort through all my photos 
to make up a basic tips/ techniques post though.
I learned some great tricks I can share.
 If this is something you wanted to REALLY master I suggest taking a class.
I took mine in Boston/ Jamaica Plain at the Eliot School and had Paul Devito Jr. and his son Paul as instructors.  They know their shit.
The hardest part for me was actually the drive.  I just wish it was closer.
It took me 1 1/2 hours to get there due to the fact that I was going through Boston at rush hour. Then when I left there always was a Red Sox's or Bruin's game letting out as I drove home- so I endured road rage and created new swear words.
But despite that, I am glad I did this.
At the moment my little chair is in my sunroom with freshly painted minty legs.
My children are not allowed near the chair.
I'm ScotchGuarding it today.


If you have any questions shoot them over.  
I will be working on the How To post next, so I can focus it on any area you need.
I also still have 2 classes left, 
so up next and I am bringing a cushion to class so I can learn how to make a proper cushion cover WITH welt and a zipper. 
(2 things I always leave off because I am a lazy step-skipper)

Can it be I am actually learning a lesson in patience?
Ahhh, yes grasshopper.  

I'm off to plop my bum in a chair.

Product Review: DIY Driftwood and a Coupon Code

I wanted to share a very cool product with you guys.  
Have you heard of DIY Driftwood?

Its a simple, non-toxic solution that gives bare wood 
the look of aged driftwood in one easy step. 
And it is very affordable at only $12.99 a package!

Check out the range of tones it creates on different woods:

I was contacted by Kim, the brains behind the product, and she asked me if I would like to give it a try.
I have done a "painted" driftwood finish in the past, 
but this looked much easier and didn't require all the layers of paint, so of course I was game.

She is also being very kind by offering up my readers a 20% off Coupon Code.
 Just use code: OVERLAYS at checkout.
Good until 7/5/13!


 I had the perfect test subjects in mind- plain old pine IKEA and this old oak table:
 I had "limed" it a few years ago, but it still wasn't working for me.
I had big plans for it and wanted to put it in our new sunroom, it was just still too "brown".
before

The new sunroom, as you saw yesterday, is bright and beachy, so I was all for soft faded grays.
after

So here is what I did.
(Warning- nothing ever goes "just as I planned" with me, so get ready for a one of a kind review)
First off, you will want to start with relatively clean, bare wood.
I did a light sand to mine and I was ready.
I opened up my pretty packets of Driftwood Finish and followed the instructions,
mixing the packet with one cup of water.

The actual product kind of looks like bath salts and is non-toxic.

You can brush or roll it on...
And thats it.
The directions recommend letting it dry in the sun, which accelerates the process.
You can already see the graying out of the wood happening after a few minutes, but it will continue to deepen over the next 24 hours...
Here is a side by side about 20 minutes later.  
(It was partly cloudy the day I did it.)
Next I brushed out the table top and base:
and I was amazed by how fast it changed it to a pretty charcoal gray finish in just minutes!
*FYI, different woods react differently.  The more porous the grain the bigger the change- so that means oak and mahogany will go darker.  Check the chart in the first image.*


The packet recommends sealing your finish with a wax.  
There is a reason for this as I quickly learned.
 I finished the table, placed it in our new sunroom and got sidetracked before sealing it. 
Meanwhile my husband sat down at our new table with a glass of water.  Uh-oh!
He left a bunch of ring marks!
That will teach me to follow directions and not my ADD.
I contacted Kim and she suggested wetting the area and putting it outside in the sun to have it even out.
Problem was I already assembled the table and it wasn't going to fit out the door, so I decided to try reapplying more solution to the area and sliding the table over to a sunny spot in the room.
First I wet the area, then reapplied to the rings. This probably would have been just fine, but
I decided to second coat the entire table to make sure it will all be even.

Guess what?
A second coat deepened the color MUCH more than I expected...
It was a nice shade, but now too dark for my beachy scheme.
I thought about putting a white "lime" wax over it to lighten and protect it.
 I knew that would work just fine,
but since I was playing guinea pig I figured I test out some other avenues for this product.
(Hope you don't mind Kim!)
I remembered  I had a can of Zar "Coastal Boards" stain leftover from my dining room table.
It was an oil based stain, and I wanted to see how it would react, so
I did a little test patch.  I liked what was happening, so I rubbed it all over the table...
and wiped it off with a clean rag:
a perfect gray/ happy accident!

I rubbed it over the legs and I was done.
I considered adding a clear flat varnish to completely seal it, 
but it stood up to the water glass test this time.


 Next up I was a pine IKEA Rast.
I did a test spot on the inside of a drawer and was instantly excited by the result:
So I brushed it on and let it sit in the sun:
But I was let down by dear old IKEA. 
 Here is the problem, their furniture is made of several pieces of pine stops glued together, so it didn't take evenly.  Some strips were darker while others barely changed... 
This would have worked great for a solid pine dresser though. 

Pine and poplar change to a much lighter tone than oak, but Kim has since told me this is due to the amount of tannins in the wood.  To get a deeper tone on these lighter woods she suggests brushing on a coat of regular tea beforehand to add tannins and get a bigger reaction.
 I also wondered if several coats might darken it up more, but I had run out of solution 
at this point.



Other great ideas to use this product for you ask?
I started to think about all the dated "yellow oak" out there, especially on cabinets and vanities.

How much nicer would they look grayed down?

Then there are the outdoor uses...
Having to patch an old weathered fence.  I bet this would accelerate the weathering in no time!
via bring-joy.com


outdoor furniture

 Here are some more images from DIY Driftwood:



I even thought about inexpensive wood frames from hobby shops... 
speaking of hobby shops they have rows of unfinished wood!

Overall I think this is such an easy product to use, and next time I will definitely seal it once it dries!
I think it is great for raw wood, or wood that needs minimal sanding.
For wood that has been polyurethaned, the finish will need to be stripped or sanded off so that it can penetrate the wood, so as long as you are up for it I say go for it!


Please check out Kim's site and shop and be sure to use code OVERLAYS for 20% off!
Its such a simple genius product 
and I love a good entrepreneur story.  She is also working on a line of waxes, so stay tuned!
Thanks so much Kim for letting me test this out!








big pile of awesome

 You know what is awesome?
Summer.  
It has me all stupid-high on life right now.

Thanks to the recent weekend heatwave, my brain melted and I totally checked out and pretended I was on vacation.
That meant sleeping in, beach everyday, cocktails everyday, and thanks to the arrival of a fire pit we were burning/ roasting things everyday.  

Thank you heatwave for making things A freaking OK around here.
We had some firsts too... 
Maybe it was the heat, but my kids actually sat around reading books
(see above and below)  
What?
 I got my first sunburn of the season, not so awesome.
(I did use SPF 50, but it was hotstuffs out)
 The older, non-water loving child became a fan of the beach...
we angered some crabs...
 took beach naps...
and met the new family that moved in next door...
4 little babies and a Mama that I want to squeeze like Elf, but will refrain from.
Instead I spent the evenings talking raccoon to them...
thinking I had skills like St. Francis,
while my neighbors and husband were probably thinking
'Wow, she's had too much wine and sun'.
I must have annoyed the raccoon family because they moved out almost as quick as they moved in.
Probably something I said.

 And to top this all off it's peony season!
 I got eager and picked a bunch way too soon.
Many of those are never gonna open.

oh, almost forgot this started off as a design blog-
Guess what?  I also finally finished a room!
Sunroom complete!

I realized I do get crazy in a heatwave. 
 Last year I painted my kitchen cabinets and striped the ceiling, so I guess its normal for me.


this here wall/windows will be going soon when we start the kitchen remodel...
the curbside chairs are painted and upholstered 
with a Lulu DK remnant I had scored online a while back...

the sign is from my husband's first office, 
and felt it fit the space since this is where we hang when we entertain

almost every other piece in this room is from a flea market or thrift store,
super "budget room" 



the side board was a $5 find and was dark brown when I found it.
it will now serve as the bar
Eventually the floor will be tiled, and the jury is out on a rug.
The wheels on the chairs catch, so its not looking promising.
So who's coming over for drinks and to learn raccoon?




LinkWithin

Related Posts with Thumbnails